the technical catalogue of the Sannini
DOWNLOAD 61,6 Mb
Extruded clay which is then simply fired without altering the surface. Subtly streaked finish obtained by the natural coloration of salts brought
to the surface prior to firing, in the delicate phase of drying.
The material with its natural skin maintains a light tonality, the result of a method of working which gives the product an essential and totally pure aspect. The unusual surface has a poor yet sought-after aspect which is what makes it so exclusive. It is laid according to the traditional system or with adhesive. Advised width of joints minimum 3 mm.
For indoor and outdoor use irrespective of environmental factors, which in fact enhance the characteristics of the product over time. To be treated after laying if used for interiors.
Available also in “Flash” version.
Due to its physical-technical characteristics, “Litos” can be installed in interiors or exteriors. Laying in freezing areas is allowed if the material is correctly installed and does not undergo any other surface treatment.
For inside use the material requires a treatment or we recommend the use of our factory-finished series, see chapter “Flash System”.
Extruded terracotta fired without any working processes on its surface.
Slightly striped finish obtained through the natural coloration of the salts moving towards the surface during the drying process, prior to firing.
Extruded terracotta with smooth “litos” surface and fullbody tobacco colouration.
The coloration is being obtained by mixing a composition of oxides into the clay, allowing a uniform colour penetration and distribution. All physical and mechanical characteristics remain unaltered.
Extruded terracotta with smooth “litos” surface and fullbody champagne colouration.
The coloration is being obtained by mixing a composition of oxides into the clay, allowing a uniform colour penetration and distribution. All physical and mechanical characteristics remain unaltered.
Upon request The Litos Sannini treated with Flashsystem l’an exclusive method of treatment carried out in the factory by Sannini. It entails a complete cycle of working, using avantgarde techniques and products studied to preserve the terracotta’s natural qualities as a sign of respect to the environment and its ecosystem. All materials used for the treatment of Flash are non-toxic, and being water-based, do not contain solvents. Essential feature of Flashsystem is its in-depth protection which guarantees resistance to stains, damp rings and efflorescences, although the original transpiring nature of the material is maintained. As a consequence, the cladding with these ready-to-use products presents itself with the colour and aspect of terracotta treated traditionally on site with acids and waxing. Such operations become superfluous since Flash products do not alter when laid if the mounting instructions are followed correctly.
CONTINUE
Mortar or glue.
Minimum joint advised 3 mm.
After installation and grouting, acidwashing is requested to remove dirt, cement and efflorescences.
Litos finish can be combined with all “externa” products.
See also “flash system”, and “superficie sannini”.
“Require Informations”.
CANTINA ANTINORI BARGINO FIRENZE