the technical catalogue of the Sannini
DOWNLOAD 61,6 Mb
Extruded terracotta with rustic surface, known and used for decades owing to its particular brushed finish. This category is constituted by a wide range of products which have contributed to spreading the image of Tuscan tradition throughout the world.Its characteristic roughness is obtained by working the surface of the material with steel brushes prior to firing.
It is laid according to the traditional system or with adhesive. Advised width of grout joints minimum 3 mm. For indoor and outdoor use irrespective of environmental or climatic factors. The transpiring nature of the terracotta guarantees a healthy and particularly comfortable environment. To be treated after laying if used for interiors.
Available also in Flash version.
Due to its physical-technical characteristics, BRUSHED COTTO can be installed in interiors or exteriors. Laying in freezing areas is allowed if the material is correctly installed and does not undergo any other surface treatment.
For inside use the material requires a treatment or we recommend the use of our factory-finished series, see chapter “Flash System”.
Extruded terracotta with rustic surface, obtained through working the element’s surface with steel brushes prior to firing.
The intense colour of this tile is due to the removal of surface salts during the brushing process.
Extruded terracotta with rustic surface “arrotato” and fullbody tobacco colouration.
The coloration is being obtained by mixing a composition of oxides into the clay, allowing a uniform colour penetration and distribution. All physical and mechanical characteristics remain unaltered.
Extruded terracotta with rustic surface “arrotato” and fullbody champagne colouration.
The coloration is being obtained by mixing a composition of oxides into the clay, allowing a uniform colour penetration and distribution. All physical and mechanical characteristics remain unaltered
Upon request The Brushed Cotto Sannini treated with Flashsystem l’an exclusive method of treatment carried out in the factory by Sannini. It entails a complete cycle of working, using avantgarde techniques and products studied to preserve the terracotta’s natural qualities as a sign of respect to the environment and its ecosystem. All materials used for the treatment of Flash are non-toxic, and being water-based, do not contain solvents. Essential feature of Flashsystem is its in-depth protection which guarantees resistance to stains, damp rings and efflorescences, although the original transpiring nature of the material is maintained. As a consequence, the cladding with these ready-to-use products presents itself with the colour and aspect of terracotta treated traditionally on site with acids and waxing. Such operations become superfluous since Flash products do not alter when laid if the mounting instructions are followed correctly.
CONTINUE
Technical-date Cotto Arrotato
DOWNLOAD 27 Kb
Technical-date CottoFlash Arrotato
DOWNLOAD 28 Kb
Mortar or glue.
Minimum joint advised 3 mm.
After installation and grouting, acidwashing is requested to remove dirt, cement and efflorescences.
For other special elements and sizes see also “formati speciali e complementi”.
“Require Informations”.